VOLVO
DDM-B1B7086 - LIN Bus Circuit #2. Bus Signal / Message Failures. Signal invalid
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The driver door module communicates over LIN bus 2 with the modules for the cameras on the left and right sides of the car. The fault is stored when a signal from the cameras is incorrect, and the cause lies in the module that sends the signal rather than in the driver door module.
Mulige årsaker
- The cause lies in the sending module, that is the camera on the left or the right side
Hva du kan gjøre
- 1Read and clear the code, road test and see whether it returns
- 2Check that the fuses are intact
- 3Check that the connectors to the cameras are free from moisture and oxidation
- 4If the fault remains, have a workshop with diagnostic equipment determine which camera gives the faulty signal and repair it
Symptomer du kan merke1
- An LED does not light up
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.