VOLVO
DDM-B1C1315 - Driver Up/Down Mirror Motor Feedback Circuit. General Electrical Failures. Circuit short to battery or open
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The driver door module checks the signal from the position sensor, a potentiometer, which registers the up and down position of the mirror. The fault is stored when the signal is too high, which is caused by the signal wire having contact with supply voltage or being broken.
Mulige årsaker
- The signal wire is short-circuited to supply voltage
- Open circuit in the signal wire
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Move the mirror up and down and check that the movement is smooth all the way
- 3If you have a diagnostic tool, compare the mirror position in live data while moving it and check that the value follows the movement
- 4Use a multimeter to check that the signal wire has no contact with battery positive and is not broken
- 5Inspect the cable to the mirror for chafing and pinching
- 6If the fault remains, have a workshop with diagnostic equipment check the control module and the mirror
Symptomer du kan merke1
- Operation of the outer mirror does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.