VOLVO
DDM-E003 - Configuration fault. Faulty configuration
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The driver door module compares its own configuration ID with the configuration that the central electronic module (CEM) sends out on the CAN network. The fault is stored when they do not match, or when communication with the CEM is interrupted. It can occur if the module is not intended for this particular car, for example if it is second-hand and has different software or hardware.
Mulige årsaker
- Incorrect CAN configuration ID, because the module is not intended for this car
- Open circuit in the CAN wires between the module and the central electronic module (CEM)
Hva du kan gjøre
- 1Read the codes in the central electronic module (CEM) and diagnose them first
- 2Check that the fuses are intact
- 3If the module has been replaced or is second-hand, this is an important clue, because a module from another car may have the wrong software
- 4Check that the wires between the driver door and the CEM show no visible damage and that the connectors are secure
- 5If the fault remains, have a workshop load the correct software into the module, or replace the module if it is damaged
Symptomer du kan merke3
- The control panel in the driver door does not work
- The automatic closing of the windows does not work
- The car cannot be operated with the remote control
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.