VOLVO
DDM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The driver or passenger door module (DDM/PDM) should receive the vehicle's configuration data from the central electronic control module (CEM) over the CAN network. The code is stored when that information is missing, or when a wrong value persists for too long. The fault points to a communication problem with the CEM, so troubleshooting starts there. The code is erased automatically when the configuration arrives again.
Mulige årsaker
- Break in the CAN network
- Communication wire shorted to ground or to voltage
- Contact resistance, oxidation or a loose connection in the connections
Hva du kan gjøre
- 1Read and note the codes in all control modules, since several codes can be related
- 2Check that the fuses are intact
- 3Check the connectors in the driver door and at the central electronic control module (CEM) for loose contacts, chafing and corrosion
- 4Use a multimeter to check that the communication wires have no contact with ground (the body) when they are disconnected at both ends
- 5If the code does not clear, have a workshop with diagnostic equipment check the CAN network and the CEM
Symptomer du kan merke5
- The child lock does not work
- Locking and unlocking with the central locking does not work
- Electric adjustment of the door mirrors does not work
- The window lift is inoperative, reduced or behaves incorrectly
- Automatic memory adjustment of the door mirrors does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.