VOLVO
DEM-E000 - Control module communication. Faulty communication
System
Firehjulsdrift (DEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, M66 AWD
- Volvo S60 (2001–2009)2003–2005Alle girkasser unntatt: AW55-50/51SN
- Volvo S60 (2001–2009)2006–2008Alle girkasser unntatt: AW55-50/51SN, TF-80SC
- Volvo S60 (2001–2009)2009Kun girkasse: AW50/51 AWD, M58
- Volvo S80 (1999–2006)2003–2006Kun girkasse: AW50/51 AWD
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, M66 AWD
- Volvo V70 (2000–2008)2003–2005Alle girkasser unntatt: AW55-50/51SN
- Volvo V70 (2000–2008)2006–2007Alle girkasser unntatt: AW55-50/51SN, TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2003–2007
- Volvo XC90 (2003–)2003–2004, 2006Alle girkasser unntatt: AW55-50/51SN
- Volvo XC90 (2003–)2005Alle girkasser unntatt: AW55-50/51SN, TF-80SC AWD
- Volvo XC90 (2003–)2007Alle girkasser unntatt: AW55-50/51SN, TF-80SC
- Volvo XC90 (2003–)2008Alle girkasser unntatt: TF-80SC
- Volvo XC90 (2003–)2009Kun girkasse: AW50/51 AWD
Hva betyr feilkoden?
The four-wheel drive control module (DEM) sends and receives information on the CAN network. When a serious disturbance blocks communication, the module cannot be communicated with and the code is stored. The fault may lie in a short-circuited or broken CAN wire, in the module itself or in another module on the same part of the network. The code can only be read out if the fault is intermittent.
Mulige årsaker
- Short circuit between the CAN wires
- Break in one of the CAN wires
- Internal fault in the control module
- Internal fault in another module on the same part of the CAN network
Hva du kan gjøre
- 1Read the codes in all control modules, and check whether codes for lost communication are stored in the central electronic control module (CEM); troubleshoot from those first
- 2Check that the battery connections are secure and clean and that the fuses are intact
- 3Use a multimeter to check whether any CAN wire touches ground or battery voltage, with the battery negative terminal disconnected
- 4Check the connectors and wiring in the CAN network for chafing, pinching, moisture and loose contacts
- 5If the fault only shows now and then, gently shake the wiring and connectors with the ignition on and see whether the communication fault appears
- 6If the code returns, have a workshop with diagnostic equipment find out which module disturbs the network before any module is replaced
Symptomer du kan merke4
- The four-wheel drive does not work
- Message in the text display, which does not apply to all models
- The traction control warning lamp lights
- The general warning lamp lights
Hva feilen kan påvirke1
- The control module shuts down and stays off until the supply voltage is broken; at the next start it tries to communicate again
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.