VOLVO
DEM-P060254 - Powertrain Control Module Programming Error. System Programming Failures. Missing calibration
System
Firehjulsdrift (DEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
Although the code is titled powertrain control module programming error, it concerns the calibration of the four-wheel drive control module (DEM). The module has calibratable values that must be stored, and if they are missing or wrong the code is set. After a control module is replaced it must be calibrated, which is a task for a workshop.
Mulige årsaker
- Calibration not carried out
- Calibration fault
- Damaged four-wheel drive control module (DEM)
- The control module has not been calibrated after replacement
Hva du kan gjøre
- 1Read and erase the code, then road test to see whether it returns
- 2If the four-wheel drive control module has been replaced recently, tell the workshop, since it needs calibrating
- 3If the fault was temporary and does not return, it was probably a disturbance when the module started
- 4If the code returns, have a workshop with diagnostic equipment calibrate or replace the four-wheel drive control module
Symptomer du kan merke2
- The four-wheel drive does not work
- Warning symbol and message in the display
Hva feilen kan påvirke1
- The four-wheel drive is disengaged
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.