VOLVO
DEM-P16891D - Oil Pressure Control Solenoid Circuit. General Electrical Failures. Circuit current out of range
System
Firehjulsdrift (DEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellXC90 (2003–)
Vis modeller per årsmodell og motor (4)
- Volvo XC90 (2003–)2009–2010Kun motor: B6324S, B8444S · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2012Kun motor: B6324S5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Kun motor: B6324S5, D5244T18 · Kun girkasse: TF-80SC AWD
Hva betyr feilkoden?
The four-wheel drive control module (DEM) controls the control valve, the axial solenoid, by regulating the current. The code is stored when the current stays outside the permitted values for a longer period, which can be caused by a damaged valve, poor contact or a damaged control module. The check is made during normal driving, and the four-wheel drive is disengaged.
Mulige årsaker
- Damaged control valve or axial solenoid
- Contact resistance and oxidation in the connectors
- Damaged four-wheel drive control module (DEM)
Hva du kan gjøre
- 1Read and erase the code, then road test under normal driving to see whether it returns
- 2Check the connector at the control valve for oxidation, loose contacts and damage
- 3Check that the wires to the control valve are intact and not chafed
- 4If the code returns, have a workshop with diagnostic equipment replace the control valve and the control module, as they are replaced as one unit
Symptomer du kan merke2
- Four-wheel drive and all-wheel drive do not work
- Warning symbol and message in the display
Hva feilen kan påvirke1
- The four-wheel drive is disengaged
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.