VOLVO
DEM-U010000 - Lost Communication With Engine control module. General Failure Information. No sub type information
System
Firehjulsdrift (DEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2009–2010Kun motor: B6324S, B8444S · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2012Kun motor: B6324S5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Kun motor: B6324S5, D5244T18 · Kun girkasse: TF-80SC AWD
Hva betyr feilkoden?
The four-wheel drive control module (DEM) continuously receives the information it needs from the engine control module (ECM) over CAN communication, including the engine torque. If communication with the engine control module is lost, the code is set. The fault may lie in the engine control module, in the communication cable, or in the connections between them.
Mulige årsaker
- Fault in the engine control module (ECM)
- Open circuit in the communication cable
- Communication cable shorted to ground
- Communication cable shorted to voltage
- Contact resistance or oxidation in the connections
Hva du kan gjøre
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Test drive the vehicle to see whether the fault returns and whether four-wheel drive works
- 3If you have a diagnostic tool, read the engine control module fault codes first and remedy them before clearing this code
- 4Check the connectors on the communication cable for oxidation and loose fit, and follow the cable for chafing and pinched areas
- 5Use a multimeter to confirm the communication cable has no contact with ground or voltage
- 6If the fault remains, have a workshop check the engine control module and the CAN communication
Symptomer du kan merke1
- Four-wheel drive does not work
Hva feilen kan påvirke2
- Four-wheel drive is disengaged
- Four-wheel drive has reduced function
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.