VOLVO
DIM-000B - Outside temperature sensor. Faulty signal. Intermittent fault
System
Kombiinstrument (DIM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 XC (1998–2000)
Hva betyr feilkoden?
The outside temperature sensor sends an incorrect signal to the instrument panel, so the outside temperature is not shown correctly or not at all. The fault is intermittent, meaning it has occurred before but does not always show. The causes may be poor contact, an open circuit in the signal wire, a short to ground or voltage, or a faulty sensor.
Mulige årsaker
- Contact resistance in the connections
- Signal wire shorted to ground or voltage
- Open circuit in the signal wire
- Faulty outside temperature sensor
Hva du kan gjøre
- 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the sensor and instrument connectors for oxidation and loose fit
- 4Use a multimeter to confirm the signal wire to the sensor has no contact with ground (body) or voltage
- 5If you have a diagnostic tool, read the sensor value in live data. If the value is missing or unrealistic, the sensor or the wire is at fault
- 6If the fault remains, have a workshop replace the sensor once the wire has been checked
Symptomer du kan merke1
- The outside temperature display shows no value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.