VOLVO
DIM-DF14 - CAN bus L signal. Signal too low. Intermittent fault
System
Kombiinstrument (DIM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000)
Vis modeller per årsmodell og motor (8)
- Volvo C70 Cabriolet (1998–2005)1999, 2001–2005
- Volvo C70 Cabriolet (1998–2005)2000Alle motorer unntatt: B5244S, B5244T · Kun girkasse: M56
- Volvo C70 Coupé (1998–2002)1999, 2001–2002
- Volvo C70 Coupé (1998–2002)2000Alle motorer unntatt: B5244S, B5244T · Kun girkasse: M56
- Volvo S70 (1997–2000)1999–2000
- Volvo V70 (1997–2000)1999–2000
- Volvo V70 (2000–2008)2000Alle motorer unntatt: D5252T MSA 15.8
- Volvo V70 XC (1998–2000)1999–2000
Hva betyr feilkoden?
The voltage on the CAN-L wire is too low, which indicates that the wire is shorted to ground. The fault is intermittent, meaning it has occurred before but does not always show. Because the CAN network is shared by several control modules, the fault can disturb communication between them.
Mulige årsaker
- CAN-L wire shorted to ground
- Fault in the instrument panel
Hva du kan gjøre
- 1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the fault returns
- 2Follow the CAN-L wire for chafing and damage where it may have touched the body
- 3Use a multimeter to confirm the CAN wire has no contact with ground (body)
- 4Check the connectors at the instrument for oxidation and loose fit
- 5If the fault remains, have a workshop investigate the CAN network, as this requires measurements in the wiring
Symptomer du kan merke1
- No functions work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.