VOLVO
DIM-DF16 - CAN bus L signal. Signal too high. Intermittent fault
System
Kombiinstrument (DIM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000)
Vis modeller per årsmodell og motor (8)
- Volvo C70 Cabriolet (1998–2005)1999, 2001–2005
- Volvo C70 Cabriolet (1998–2005)2000Alle motorer unntatt: B5244S, B5244T · Kun girkasse: M56
- Volvo C70 Coupé (1998–2002)1999, 2001–2002
- Volvo C70 Coupé (1998–2002)2000Alle motorer unntatt: B5244S, B5244T · Kun girkasse: M56
- Volvo S70 (1997–2000)1999–2000
- Volvo V70 (1997–2000)1999–2000
- Volvo V70 (2000–2008)2000Alle motorer unntatt: D5252T MSA 15.8
- Volvo V70 XC (1998–2000)1999–2000
Hva betyr feilkoden?
The instrument cluster (DIM) has detected that the voltage on the CAN-L signal wire, part of the car's data network, has been too high for a period. The fault is intermittent, meaning it has been present before but is not active right now. High voltage on this wire is often caused by the wire briefly shorting to supply voltage.
Mulige årsaker
- The CAN-L wire is shorted to supply voltage, often intermittently
- Fault in the instrument cluster
Hva du kan gjøre
- 1Read the codes in other control modules, since several may be affected by the data network
- 2Check the signal wire between the instrument cluster and the other modules for chafing, pinching and places where it could short to supply voltage
- 3Use diagnostic equipment to check that CAN-L is not shorted to supply and check the connectors at the cluster
- 4Replace the instrument cluster only after the wiring has been investigated and the fault remains
Symptomer du kan merke1
- Several systems in the car may work poorly or not at all
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.