VOLVO
DIM-E001 - Control module communication. Faulty communication
System
Kombiinstrument (DIM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2013
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2013
- Volvo S40 (2004–2013)2004–2012
- Volvo S60 (2001–2009)2001–2009
- Volvo S80 (1999–2006)1999–2006
- Volvo V50 (2004–2013)2004–2012
- Volvo V70 (2000–2008)2000–2008
- Volvo V70 XC / XC70 (2001–2007)2001–2007
- Volvo XC90 (2003–)2003–2015
Hva betyr feilkoden?
The instrument cannot communicate with the other control modules on the CAN network, because a serious disturbance blocks the communication. The code is set by that disturbance. The fault may lie in a wire in the network, in the instrument, or in another control module on the same part of the network.
Mulige årsaker
- Short circuit between the CAN wires
- Open circuit in one of the CAN wires
- Internal fault in the instrument
- Internal fault in another control module on the same part of the CAN network
Hva du kan gjøre
- 1Read off the fault codes in the other control modules first and note them; they may show where the fault is
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the connectors at the instrument and at the control modules on the network for oxidation and loose fit
- 4If you have a diagnostic tool, check which control modules respond on the CAN network and note whether any are missing
- 5The ABS lamp is lit, and ABS is a safety function: have a workshop check the braking system before driving longer distances
- 6If the fault remains, have a workshop carry out a CAN fault-finding procedure with measurements in the wiring
Symptomer du kan merke5
- No gauges work
- The instrument lighting does not work
- The ABS warning lamp is lit
- The anti-spin lamp is lit
- The general red warning lamp is lit
Hva feilen kan påvirke2
- The instrument switches itself off until the power supply to it has been broken
- No speed display, because the signal to the instrument is missing
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.