Hva betyr feilkode DIM-U001000?

Diagnose og feilkodedefinisjon for DIM-U001000 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

DIM-U001000 - Medium Speed CAN Communication Bus. General Failure Information. No sub type information

System

Kombiinstrument (DIM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

6 modeller

S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (7)

Hva betyr feilkoden?

The instrument communicates on the medium-speed CAN network (MS-CAN), one of the vehicle's CAN networks. The code is set when communication is disturbed by another control module on the network, or by the instrument's own messages. The instrument may then switch off or stop working.

Mulige årsaker

Short circuit between the CAN wires
Open circuit in one of the CAN wires
Internal fault in another control module on the same part of the CAN network
Damaged instrument panel module (DIM)

Hva du kan gjøre

1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the fault returns
2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
3Follow the CAN wiring between the instrument and the other control modules for chafing and pinched areas
4If you have a diagnostic tool, read which control modules respond on the network and note whether any are missing
5If the fault remains, have a workshop measure the MS-CAN network and locate the control module that disturbs communication

Symptomer du kan merke1

The combined instrument panel does not function

Hva feilen kan påvirke1

The instrument shuts down and remains inactive until its power is cut and reconnected

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.