VOLVO
DIM-U019900 - Lost Communication With Driver door module. General Failure Information. No sub type information
System
Kombiinstrument (DIM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The instrument cluster (DIM) gets no reply from the driver door module (DDM), which among other things sends information to the instrument cluster. Communication between them has stopped, so functions controlled from the driver door may show faults in the instrument cluster.
Mulige årsaker
- Break in the communication wire
- The communication wire is shorted to earth
- The communication wire is shorted to supply voltage
- Poor contact, oxidation or breaks in the connections
Hva du kan gjøre
- 1Read and note the fault codes, clear them and road test the car to see whether the fault returns
- 2Check the fuses in the fuse box. Their location is in the owner's manual or the fuse list
- 3The driver door module often controls the window regulator and the door lock. Check whether they work, as this helps show where the fault is
- 4Check that the wiring harness to the driver door is not chafed or pinched, especially where it enters the door
- 5If the driver door has recently been worked on, check that all connectors are properly reconnected
- 6If the fault returns, have a workshop with diagnostic equipment check the module and the CAN network
Symptomer du kan merke1
- The BLIS blind spot monitoring is not working
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.