VOLVO
DIM-U040268 - Invalid Data Received from TCM. Algorithm Based Failures. Event information
System
Kombiinstrument (DIM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (10)
Hva betyr feilkoden?
The instrument cluster (DIM) receives signals from the transmission control module (TCM) with a lower quality than it can accept, so the gear indicator may show the wrong gear or not work. The fault usually lies in the transmission control module and not in the instrument cluster.
Mulige årsaker
- The fault probably lies in the transmission control module (TCM)
Hva du kan gjøre
- 1Check that the fuses are intact and that the connectors to the instrument cluster and the transmission control module are fully engaged and not corroded
- 2Road test the car and note whether the gear indicator matches the selected gear, and when the fault occurs
- 3Read the fault code with a diagnostic tool, clear it and check whether it returns
- 4If the code returns, have a workshop with diagnostic equipment investigate the transmission control module, since the signal comes from there
- 5Do not replace the instrument cluster until a workshop has shown the fault lies there
Symptomer du kan merke1
- The gear indicator in the instrument cluster does not work or shows the wrong gear
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.