Hva betyr feilkode DIM-U042268?

Diagnose og feilkodedefinisjon for DIM-U042268 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Bestill reparasjon hos OBD Tuning.

VOLVO

DIM-U042268 - Invalid Data Received From Central electronic module. Algorithm Based Failures. Event information

System

Kombiinstrument (DIM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

9 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The instrument cluster (DIM) receives signals from the central electronic module (CEM) with a lower quality than it accepts, so gauges and functions in the instrument cluster may show faults. The code is a secondary fault, usually caused by some other fault in the car.

Mulige årsaker

Tyres of the wrong size have been fitted to the front or rear axle compared with the other tyres
Fault in the central electronic module (CEM), which sends signals of too low quality
Fault in the fuel tank level sensor
Fault in the temperature sensor in the left outside mirror
Fault in the gear selector position sensor
A sensor linked to the engine control module (ECM) is faulty

Hva du kan gjøre

1Compare the rolling circumference of all four tyres. Tyres of a different size can give wrong values
2This is a secondary fault, so look for the root fault first in the module that sends the signal
3Read all fault codes, especially those from the central electronic module, and fix the root fault before clearing this code
4If you have a diagnostic tool, compare the fuel level in live data with the fuel gauge while the tank is being filled and check that the values follow each other
5Check the fuses in the fuse box. Their location is in the owner's manual or the fuse list
6The code can only be cleared once the root fault is fixed. Then road test the car and check that the gauges show sensible values

Symptomer du kan merke5

The speedometer shows a fault or does not work
The fuel gauge shows too high or too low a value
The coolant temperature gauge shows too high or too low a value
The tachometer shows a fault or does not work
The trip computer does not work or shows a wrong fuel consumption

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.