VOLVO
ECM-0003 - Needle lift sensor. Signal too low. Intermittent fault.
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerS70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Hva betyr feilkoden?
The engine control module has received too low a signal from the needle lift sensor. The fault is recorded as intermittent, meaning it comes and goes, and may not be present right now. It can cause poor acceleration, a sluggish engine and knocking at idle, and boost pressure and exhaust gas recirculation are limited.
Mulige årsaker
- The signal wire is shorted to earth
- Break in the signal or earth wire
- Contact resistance in the connections
- Faulty needle lift sensor
Hva du kan gjøre
- 1Check the wires and connections to the needle lift sensor for chafing, play and corrosion
- 2Because the fault is intermittent, road test the car and note the engine speed, load or temperature at which the problem appears
- 3Measure with a multimeter that the signal and earth wires to the needle lift sensor have no break, and that the signal wire is not shorted to earth
- 4Clear the fault code and road test the car. If it returns, have a workshop with diagnostic equipment investigate the needle lift sensor and the engine control module
- 5Replacing the needle lift sensor is a workshop task
Symptomer du kan merke2
- The car accelerates poorly and feels sluggish
- The engine knocks at idle
Hva feilen kan påvirke2
- Boost pressure is limited to the basic level
- Exhaust gas recirculation (EGR) is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.