Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-000B
    VOLVO

    ECM-000B - Mass air flow sensor. Power supply too low. Intermittent fault.

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)

    Vis modeller per årsmodell og motor (4)
    • Volvo S70 (1997–2000)1999–2000Kun motor: D5252T MSA 15.8
    • Volvo S80 (1999–2006)1999–2001Kun motor: D5252T MSA 15.8
    • Volvo V70 (1997–2000)1999–2000Kun motor: D5252T MSA 15.8
    • Volvo V70 (2000–2008)2000–2001Kun motor: D5252T MSA 15.8

    Hva betyr feilkoden?

    The mass air flow sensor receives too low a supply voltage. The fault is intermittent, meaning it comes and goes, and may not be present right now. The sensor measures how much air flows into the engine. While the fault is active, the engine control module uses a substitute value for the air mass and limits boost pressure.

    Mulige årsaker

    • The supply wire is shorted to earth
    • Break in the signal or supply wire
    • Contact resistance in the connections
    • Faulty mass air flow sensor

    Hva du kan gjøre

    1. 1Check the wires and connectors to the mass air flow sensor for chafing and pinch damage, and that the connector is fully seated
    2. 2Because the fault is intermittent, note when the engine feels sluggish, and whether this happens at certain engine speeds or when the engine is warm
    3. 3Measure with a multimeter that the supply wire to the sensor has no break or short circuit to earth
    4. 4Clear the fault code and road test the car. If it returns, have a workshop with diagnostic equipment investigate the mass air flow sensor and the wiring
    5. 5If you have a diagnostic tool, read the air mass in live data at idle and with a little throttle. The value should rise as the throttle opens

    Symptomer du kan merke3

    • Poor acceleration and a sluggish engine
    • The exhaust smokes
    • Exhaust gas recirculation (EGR) does not work

    Hva feilen kan påvirke3

    • The engine control module uses a substitute value for the air mass
    • Boost pressure is limited to the basic level
    • Exhaust gas recirculation (EGR) is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.