Hva betyr feilkode ECM-0016?

Diagnose og feilkodedefinisjon for ECM-0016 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

The engine control module compares the speed calculated from the crankshaft pulse sensor with the speed calculated from the camshaft sensor. If the two do not agree, the code is set. The fault shows up as the engine starting unreliably or stalling, which can happen while the engine is running.

Mulige årsaker

Contact resistance or oxidation in the connectors
Break in the signal wire
Faulty camshaft sensor
Faulty crankshaft pulse sensor

Hva du kan gjøre

1Check the connectors to the camshaft sensor and the crankshaft pulse sensor for contact resistance and oxidation. Clean them and make sure they are fully seated
2Measure with a multimeter that the signal wires to the sensors have no break
3Check that the fuses are intact. Their location is in the owner's manual or the fuse list
4If you have a diagnostic tool, compare the engine speed with the camshaft speed in live data with the engine at idle. The values should agree
5Clear the fault code and road test the car. If it returns, have a workshop investigate the camshaft sensor and the crankshaft pulse sensor

Symptomer du kan merke2

The engine does not start or starts unreliably
The engine may stall intermittently

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

VOLVO

ECM-0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

Mulige årsaker

Contact resistance or oxidation in the connectors
Break in the signal wire
Faulty camshaft sensor
Faulty crankshaft pulse sensor

Hva du kan gjøre

1Check the connectors to the camshaft sensor and the crankshaft pulse sensor for contact resistance and oxidation. Clean them and make sure they are fully seated
2Measure with a multimeter that the signal wires to the sensors have no break
3Check that the fuses are intact. Their location is in the owner's manual or the fuse list
4If you have a diagnostic tool, compare the engine speed with the camshaft speed in live data with the engine at idle. The values should agree
5Clear the fault code and road test the car. If it returns, have a workshop investigate the camshaft sensor and the crankshaft pulse sensor

Symptomer du kan merke2

The engine does not start or starts unreliably
The engine may stall intermittently

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

ECM-0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A

Volvo-modeller feilkoden gjelder for

Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A

Glow indicator. Signal too low. Intermittent fault.

Gjelder følgende modeller:

Hva betyr feilkoden?

Mulige årsaker

Hva du kan gjøre

Symptomer du kan merke2

ECM-0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A

Volvo-modeller feilkoden gjelder for

Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A

Glow indicator. Signal too low. Intermittent fault.

Gjelder følgende modeller:

Hva betyr feilkoden?

Mulige årsaker

Hva du kan gjøre

Symptomer du kan merke2