Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-002C
    VOLVO

    ECM-002C - Fuel quantity. Wrong quantity when stopped. Intermittent fault.

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    3 modeller

    S70 (1997–2000), S80 (1999–2006), V70 (1997–2000)

    Vis modeller per årsmodell og motor (3)
    • Volvo S70 (1997–2000)1999–2000Kun motor: D5252T MSA 15.8
    • Volvo S80 (1999–2006)1999–2001Kun motor: D5252T MSA 15.8
    • Volvo V70 (1997–2000)1999–2000Kun motor: D5252T MSA 15.8

    Hva betyr feilkoden?

    The fuel quantity does not match when the car is stationary. At ignition-on the positions of the fuel quantity regulator are checked, and if the position sensor's signal differs too much from what is expected, the code is set. The fault is intermittent, meaning it comes and goes, and may not be present right now. The engine may then stall or fail to start.

    Mulige årsaker

    • The regulator's signal wire is shorted to earth or battery voltage
    • Break in the signal or supply wire to the fuel quantity regulator
    • Faulty injection pump
    • Break in the wiring to the regulator's position sensor
    • The wires to the position sensor are shorted to earth

    Hva du kan gjøre

    1. 1Check the wiring between the injection pump and the fuel quantity regulator for intermittent breaks
    2. 2Check the connectors to the engine control module and the injection pump for play and oxidation. Clean them and make sure they are fully seated
    3. 3Because the fault is intermittent, note whether the engine stalls when the car is stationary or after a while of driving
    4. 4Clear the fault code and road test. If it returns, have a workshop investigate the fuel quantity regulator and the injection pump
    5. 5The injection pump is a workshop task, since the fuel system is under high pressure

    Symptomer du kan merke2

    • The engine stalls
    • The engine does not start

    Hva feilen kan påvirke1

    • Only basic boost pressure is allowed

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.