VOLVO
ECM-0106 - Boost pressure sensor. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007Kun motor: D4204T
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Kun motor: D4204T
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Kun motor: D4204T
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
The engine control module compares the boost pressure reading with atmospheric pressure. If the two do not agree while the engine is idling, the code is stored. The cause is most often an air leak on the intake side, poor contact or damaged wiring to the sensor, but the sensors themselves can also be damaged.
Mulige årsaker
- Air leak on the engine's intake side
- Looseness, contact resistance or oxidation in the connections
- Break or short circuit in the wiring to the boost pressure sensor
- Damaged boost pressure sensor
- Damaged atmospheric pressure sensor
Hva du kan gjøre
- 1With the ignition off, look for air leaks on the intake side, for example at hoses and connections
- 2Check the connector to the boost pressure sensor for looseness, contact resistance and oxidation
- 3Use a multimeter to check that the signal wire to the boost pressure sensor does not break and has no short to ground or supply voltage
- 4If the fault returns although leaks and connectors are sound, have a workshop replace the boost pressure sensor
Symptomer du kan merke1
- Check engine lamp lights up or behaves abnormally
Hva feilen kan påvirke1
- A calculated boost pressure is used instead of the measured value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.