VOLVO
ECM-0109 - Manifold Absolute Pressure/BARO Sensor Intermittent
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (5)
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
The atmospheric pressure sensor, which is built into the engine control module, has at times given no reading or an incorrect one. The fault is intermittent, so it may have occurred without being present now. The usual cause is a loose connection or a momentary break in the signal wire, but the sensor may also be damaged.
Mulige årsaker
- Loose connections in the wiring
- Intermittent break in the signal wire
- Damaged atmospheric pressure sensor
Hva du kan gjøre
- 1Check that the fuses for the engine management are intact
- 2With the ignition off, check the connectors to the engine control module for play, and move the wiring gently while you check
- 3Erase the fault code and test drive the car; if it returns, have a workshop check the engine control module and the atmospheric pressure sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The control module uses a calculated value instead of the measured one
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.