VOLVO
ECM-0113 - Mass air flow (MAF) sensor. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007Kun motor: D4204T
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Kun motor: D4204T
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Kun motor: D4204T
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
Although the code concerns the mass air flow sensor, the temperature sensor inside it is what reports the signal that is too high. The engine control module stores the code when the signal does not match the sensor's normal behaviour, most often because the signal wire has come into contact with supply voltage.
Mulige årsaker
- Signal wire shorted to supply voltage
- Damaged air temperature sensor inside the mass air flow sensor
Hva du kan gjøre
- 1With the ignition off, check the connector to the mass air flow sensor for looseness, contact resistance and oxidation
- 2With the ignition on and the connector unplugged, use a multimeter on the signal wire; voltage there indicates a short to supply voltage
- 3Have a workshop replace the mass air flow sensor if the fault returns while the wiring is sound
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.