VOLVO
ECM-0117 - Engine temperature sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (18)
- Volvo C30 (2007–2013)2007–2009Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo C30 (2007–2013)2010Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo C30 (2007–2013)2011–2012Kun motor: B4164S3, B4204S3, B4204S4
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2005Kun motor: B4164S3, B4184S11, D4204T, D4204T2
- Volvo S40 (2004–2013)2006Kun motor: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2009Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo S40 (2004–2013)2010Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo S40 (2004–2013)2011–2012Kun motor: B4164S3, B4204S3, B4204S4
- Volvo V50 (2004–2013)2004Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2005Kun motor: B4164S3, B4184S11, D4204T, D4204T2
- Volvo V50 (2004–2013)2006Kun motor: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2009Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo V50 (2004–2013)2010Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo V50 (2004–2013)2011–2012Kun motor: B4164S3, B4204S3, B4204S4
Hva betyr feilkoden?
The engine control module has registered a coolant temperature signal that is too low. It compares the reading with an engine temperature it works out in theory at start-up. The cause is most often a break or a short to ground in the signal wire, but poor contact or a damaged sensor can also cause it.
Mulige årsaker
- Contact resistance in the connections
- Break in the signal wire
- Signal wire shorted to ground
- Damaged engine coolant temperature sensor
- Incorrect reference voltage
- Damaged control module
Hva du kan gjøre
- 1With the ignition off, check the connectors to the control module and the coolant sensor for breaks, contact resistance and oxidation
- 2Use a multimeter to check that the signal wire does not break and has no short to ground when you move the wiring
- 3If you have a diagnostic tool, read the engine temperature in live data when the engine is cold and compare it with the surrounding temperature
- 4If the wiring is sound, have a workshop replace the coolant temperature sensor or check the control module
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lights up
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.