VOLVO
ECM-0118 - Engine coolant temperature (ECT) sensor. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (18)
- Volvo C30 (2007–2013)2007–2009Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo C30 (2007–2013)2010Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo C30 (2007–2013)2011–2012Kun motor: B4164S3, B4204S3, B4204S4
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2005Kun motor: B4164S3, B4184S11, D4204T, D4204T2
- Volvo S40 (2004–2013)2006Kun motor: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2009Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo S40 (2004–2013)2010Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo S40 (2004–2013)2011–2012Kun motor: B4164S3, B4204S3, B4204S4
- Volvo V50 (2004–2013)2004Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2005Kun motor: B4164S3, B4184S11, D4204T, D4204T2
- Volvo V50 (2004–2013)2006Kun motor: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2009Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo V50 (2004–2013)2010Kun motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo V50 (2004–2013)2011–2012Kun motor: B4164S3, B4204S3, B4204S4
Hva betyr feilkoden?
The engine control module has registered a coolant temperature signal that is too high. The cause is most often a signal wire touching supply voltage, but a damaged sensor or control module, an extremely low engine temperature, or an incorrect reference voltage can also cause it.
Mulige årsaker
- Signal wire shorted to supply voltage
- Damaged engine coolant temperature sensor
- Very low engine coolant temperature
- Incorrect reference voltage
- Damaged control module
Hva du kan gjøre
- 1With the ignition off, unplug the coolant sensor connector and check the contacts for contact resistance and oxidation
- 2With the ignition on and the connector unplugged, use a multimeter on the signal wire; voltage there indicates a short to supply voltage
- 3If you have a diagnostic tool, read the engine temperature in live data and see whether the value matches how cold or warm the engine is
- 4If the wire is sound and the fault remains, have a workshop check the sensor and the control module
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lights up
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.