VOLVO
ECM-0222 - Accelerator pedal (AP) position sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4204T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4204T
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4204T
Hva betyr feilkoden?
The engine control module has received a message from the central electronic module (CEM) saying that the analog accelerator pedal signal is too low. The signal travels over the CAN network, so the fault lies in the CEM rather than the engine control module. The code cannot be cleared until the CEM fault has been remedied.
Mulige årsaker
- Fault in the central electronic module (CEM), which must be traced first
Hva du kan gjøre
- 1Read the fault codes in the central electronic module (CEM) first, since this code comes from there
- 2Trace and fix the faults in the CEM, with help from a workshop if needed
- 3Then clear the code in the engine control module and road test to see whether it returns
- 4Check that the connector at the accelerator pedal sensor is fully engaged and free from oxidation
- 5If the fault returns, have a workshop with diagnostic equipment check the CEM and the accelerator pedal sensor wiring
Symptomer du kan merke1
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- If the PWM signal from the accelerator pedal sensor works, it is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.