VOLVO
ECM-0223 - Accelerator pedal (AP) position sensor. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4204T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4204T
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4204T
Hva betyr feilkoden?
The central electronic module (CEM) has sent a fault message to the engine control module saying that the analog accelerator pedal signal is too high. The cause therefore lies in the CEM, and that fault must be fixed there before the code can be cleared. The engine control module can instead use the accelerator pedal sensor PWM signal if it is working.
Mulige årsaker
- Fault in the central electronic module (CEM), which must be traced first
Hva du kan gjøre
- 1Read the fault codes in the central electronic module (CEM) first, since this code is passed on from there
- 2Trace and fix the CEM faults, with help from a workshop if needed
- 3Then clear the code in the engine control module and road test to see whether it returns
- 4Check that the connector at the accelerator pedal sensor is fully engaged and free from oxidation
- 5If the fault returns anyway, have a workshop check the communication between the CEM and the engine control module
Symptomer du kan merke1
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- If the PWM signal from the accelerator pedal sensor works, it is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.