VOLVO
ECM-0271 - Injector cyl 4. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The engine control module has registered that the injector for cylinder 4 gives too high a signal and treats this as a fault. The wire may have come into contact with voltage, or the injector may be damaged. The lamp comes on, but the fault has no other consequences for the car.
Mulige årsaker
- Signal wire shorted to supply voltage
- Damaged injector, cylinder 4
Hva du kan gjøre
- 1Read the fault code, clear it and road test to see whether it returns
- 2Check that the connector at the cylinder 4 injector is fully engaged and free from oxidation
- 3With the ignition on and the connector unplugged, use a multimeter to see whether the signal wire picks up voltage
- 4Follow the signal wire to cylinder 4 and look for chafing and places where it may have touched a live wire
- 5If you have a diagnostic tool, see whether the cylinder 4 injector value in live data differs from the others
- 6If the fault returns, have a workshop decide whether the injector should be replaced
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.