VOLVO
ECM-0384 - Glow Plug Control Module Control Circuit High
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (5)
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
The glow plugs are switched through a relay, and the control module monitors the control circuit between that relay and the module. The fault is set when the control module detects a signal that is too high in this circuit.
Mulige årsaker
- Signal wire short-circuited to voltage
- Wire supplying the glow plugs short-circuited to voltage
- Damaged glow plug relay
Hva du kan gjøre
- 1Check that the fuses are intact. Their locations are shown in the instruction manual or on the fuse box cover
- 2Switch off the ignition and check the connectors to the glow plug relay for loose connections and oxidation
- 3Use a multimeter to check that the signal wire from the relay is not shorted to voltage
- 4Also check that the supply wire to the glow plugs is not shorted to voltage, and look for chafed wires that may have touched a live part
- 5If the fault remains, have a workshop with diagnostic equipment check the relay and the wiring
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.