Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-0403
    VOLVO

    ECM-0403 - Exhaust Gas Recirculation Control Circuit

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (5)
    • Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Kun motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6

    Hva betyr feilkoden?

    The engine control module (ECM) controls the EGR valve with a PWM signal through an internal power stage and checks that it responds correctly. The fault is set if the signal is too high or too low, if the temperature is too high, or if the air flow does not match.

    Mulige årsaker

    • Temperature in the EGR system too high
    • Contact resistance or oxidation in the connections
    • Signal wire short-circuited to ground
    • Signal wire short-circuited to voltage
    • Damaged EGR valve
    • Damaged mass air flow sensor (MAF)

    Hva du kan gjøre

    1. 1Read out the fault code, erase it and road-test to see whether it returns
    2. 2Check that the fuses are intact. Their locations are shown in the instruction manual or on the fuse box cover
    3. 3Switch off the ignition and check the connectors to the EGR valve and the mass air flow sensor for contact resistance and oxidation
    4. 4Use a multimeter to check that the signal wire to the EGR valve is not shorted to ground or voltage
    5. 5If you have a diagnostic tool, read the mass air flow value in live data with the engine running and check that it follows the engine speed
    6. 6If the fault remains, have a workshop with diagnostic equipment check the EGR valve and the mass air flow sensor

    Symptomer du kan merke2

    • The check engine lamp lights or behaves abnormally
    • Yellow warning symbol and text message in the display

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.