Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-042C
    VOLVO

    ECM-042C - Rear temperature sensor, catalytic converter. Signal too low

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007Kun motor: D4204T
    • Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Kun motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo S40 (2004–2013)2005–2006Kun motor: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007Kun motor: D4204T
    • Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo V50 (2004–2013)2005–2006Kun motor: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007Kun motor: D4204T
    • Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6

    Hva betyr feilkoden?

    The control module continuously compares the signal from the rear temperature sensor in the catalytic converter with a calculated value, and sets the fault if the signal is too low. The check is made when the ignition is switched on. The causes are contact resistance or oxidation in the connections, open or short circuits in the wiring, or a damaged sensor.

    Mulige årsaker

    • Contact resistance or oxidation at the sensor connector
    • Open or short circuit in the wiring to the sensor
    • Damaged temperature sensor

    Hva du kan gjøre

    1. 1Read out the fault code, erase it and check whether it returns at the next ignition on
    2. 2Switch off the ignition and check the connector to the rear sensor for contact resistance and oxidation
    3. 3Use a multimeter to check that the signal wire from the sensor has no open circuit and is not shorted to ground or voltage
    4. 4Look for chafing on the wiring to the rear sensor, especially where it runs close to the exhaust pipe
    5. 5If the fault remains, have a workshop with diagnostic equipment check the rear temperature sensor

    Symptomer du kan merke1

    • The check engine lamp lights or behaves abnormally

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.