Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-0556
    VOLVO

    ECM-0556 - Brake booster pressure sensor circuit range/position

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (13)
    • Volvo C30 (2007–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo C30 (2007–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3, B4204S4
    • Volvo S40 (2004–2013)2005Kun motor: B4184S11
    • Volvo S40 (2004–2013)2006Kun motor: B4184S11, B4184S8
    • Volvo S40 (2004–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo S40 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4
    • Volvo V50 (2004–2013)2005Kun motor: B4184S11
    • Volvo V50 (2004–2013)2006Kun motor: B4184S11, B4184S8
    • Volvo V50 (2004–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo V50 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4

    Hva betyr feilkoden?

    The engine control module monitors the pressure in the brake servo. The fault is set when the pressure falls outside its limit value while the engine runs. The causes may be a damaged vacuum system between the non-return valve and the brake servo, or a damaged engine control module.

    Mulige årsaker

    • Damaged vacuum system between the non-return valve and the brake servo
    • Damaged engine control module

    Hva du kan gjøre

    1. 1Save the fault codes and their values before erasing anything, since erasing removes all fault codes in the engine control module
    2. 2Start the engine, let it idle for a while, then switch it off and switch the ignition on again
    3. 3Check the hoses and connections to the brake servo for cracks and leaks
    4. 4Check the vacuum sensor connector for looseness, contact resistance and oxidation
    5. 5Because the brake servo is part of the brake system, have a workshop check the vacuum system if a leak is found or the fault remains

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.