VOLVO
ECM-060C - Fuel injection system driver Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007Kun motor: D4204T
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Kun motor: D4204T
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Kun motor: D4204T
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
The engine control module (ECM) drives the fuel injectors through an integrated output stage that runs at a much higher voltage than the battery. If a fault is found in the circuits to the injectors, the code is set. Engine speed and torque are limited to a calculated value while the fault is present. The fault may lie in the connectors, the wiring or the injector itself.
Mulige årsaker
- Loose connections, contact resistance or oxidation at the injector connectors
- Short circuit in the wiring to the injectors
- Open circuit or short circuit in the CAN wiring
- Blocked fuel return line from the injectors
- An injector has jammed
- Damaged injector
Hva du kan gjøre
- 1Check the connectors on all the injectors: are they fully engaged and free from oxidation and corrosion?
- 2Inspect the wiring to the injectors for chafing and breaks
- 3With the ignition off, use a multimeter to check that the injector wiring has no open circuit and is not short-circuited to earth (the body)
- 4If you have a diagnostic tool, activate the injectors one at a time and check that each one operates
- 5Check that the fuel return line is not kinked or blocked
- 6If the fault remains after these checks, an injector or the control module is probably at fault; have a workshop determine which and replace it
Symptomer du kan merke3
- Malfunction indicator lamp (Check engine) lit or behaving abnormally
- Poor performance or the engine lacks power
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- Engine speed and torque are limited to a calculated value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.