VOLVO
ECM-060D - Accelerator pedal (AP) position sensor. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007Kun motor: D4204T
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Kun motor: D4204T
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Kun motor: D4204T
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
The engine control module (ECM) checks the two signals from the accelerator pedal position sensor: the PWM signal, which goes directly to the control module, and the analog signal, which goes via the central electronic module (CEM). If either signal disagrees with the value the ECM has calculated, the code is set. The fault can cause poor performance and an engine speed limit.
Mulige årsaker
- Loose connections, contact resistance or oxidation at the terminals
- Open circuit or short circuit to earth in the signal cable
- Open circuit in the supply or earth lead to the sensor
- Low battery voltage
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1If you have a diagnostic tool, press the accelerator slowly down and up and check in live data that both the PWM and analog values follow the pedal smoothly, without jumps
- 2If you have a diagnostic tool, read out the fault codes in the central electronic module (CEM) and remedy them first, since the analog signal passes through the CEM
- 3Check the sensor connector for contact resistance and oxidation
- 4Check that the battery is in good condition and that its terminals are tight, since low voltage can cause the fault
- 5With the ignition off, use a multimeter to check that the signal wire has no open circuit or short to earth
Symptomer du kan merke2
- Poor performance or the car lacks power
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- Engine speed is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.