Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-0610
    VOLVO

    ECM-0610 - Engine control module (ECM). Faulty signal

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    3 modeller

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (13)
    • Volvo C30 (2007–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo C30 (2007–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3, B4204S4
    • Volvo S40 (2004–2013)2005Kun motor: B4184S11
    • Volvo S40 (2004–2013)2006Kun motor: B4184S11, B4184S8
    • Volvo S40 (2004–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo S40 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4
    • Volvo V50 (2004–2013)2005Kun motor: B4184S11
    • Volvo V50 (2004–2013)2006Kun motor: B4184S11, B4184S8
    • Volvo V50 (2004–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo V50 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4

    Hva betyr feilkoden?

    The ECM checks its own configuration ID against the signal configuration that the central electronic module (CEM) broadcasts on the CAN network. If the IDs do not match, the code is set. This is a follow-on code: it is stored first in the CEM and then in the ECM. The fault should therefore be fixed in the CEM first, and the code cleared afterwards.

    Mulige årsaker

    • The central electronic module (CEM) sends incorrect configuration data over the CAN network

    Hva du kan gjøre

    1. 1Read the fault codes in the central electronic module (CEM) first and remedy them; this code is a follow-on fault
    2. 2If work has recently been done on the car, such as replacing a control module, the configuration may be wrong; have a workshop check it and reprogram it if needed
    3. 3Clear this code only after the CEM fault has been remedied and cleared, then road test the car and see whether it returns

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.