Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-0617
    VOLVO

    ECM-0617 - Starter motor relay. Signal too high

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (12)
    • Volvo C30 (2007–2013)2007–2010Kun motor: B4164S3, D4204T
    • Volvo C30 (2007–2013)2011–2012Kun motor: B4164S3
    • Volvo C70 (2006–2013)2008Kun motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo S40 (2004–2013)2004Kun motor: D4204T, D4204T2
    • Volvo S40 (2004–2013)2005–2006Kun motor: B4164S3, D4204T, D4204T2
    • Volvo S40 (2004–2013)2007–2010Kun motor: B4164S3, D4204T
    • Volvo S40 (2004–2013)2011–2012Kun motor: B4164S3
    • Volvo V50 (2004–2013)2004Kun motor: D4204T, D4204T2
    • Volvo V50 (2004–2013)2005–2006Kun motor: B4164S3, D4204T, D4204T2
    • Volvo V50 (2004–2013)2007–2010Kun motor: B4164S3, D4204T
    • Volvo V50 (2004–2013)2011–2012Kun motor: B4164S3

    Hva betyr feilkoden?

    The engine control module (ECM) monitors the signal wire to the starter motor relay. If it sees the signal running too high, the code is set. The fault usually shows up when starting: the engine does not start, does not turn over, or there is no click when you try to start it.

    Mulige årsaker

    • Signal wire short-circuited to battery voltage
    • Damaged starter motor relay
    • Signal wire short-circuited to another supply voltage

    Hva du kan gjøre

    1. 1Check the fuses for the starter circuit in the engine bay fuse box, and check that the battery is in good condition
    2. 2Check that the battery terminals are tight and that the wiring from the starter motor relay is not chafed
    3. 3With the ignition off, use a multimeter to check that the signal wire to the starter motor relay is not in contact with battery voltage, for example through chafed wiring
    4. 4If the wiring is intact and the fault remains, the starter motor relay is probably damaged; have a workshop replace it

    Symptomer du kan merke3

    • The engine does not start
    • The engine does not turn over when starting
    • No relay click when you try to start

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.