VOLVO
ECM-061B - Internal Control Module Torque Calculation Performance
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The engine control module (ECM) compares the signal from the crankshaft sensor with a value it has calculated itself. If the two disagree while the engine is running, the code is set, and engine output and speed may be limited. The fault may be permanent, or it may have occurred earlier and no longer be present.
Mulige årsaker
- Damaged engine control module (ECM)
- Battery or charging system giving unstable voltage
Hva du kan gjøre
- 1Check the battery condition and that the charging system works, since low or unstable voltage can cause the fault
- 2If you have a diagnostic tool, start the engine and check the status of the code; confirm that the fault is no longer active after a road test
- 3If the fault is no longer active it may have been temporary; clear the code and watch whether it reappears
- 4If the code returns, the engine control module is probably damaged and a workshop should decide whether it needs replacing
Symptomer du kan merke2
- Text message and warning symbol in the display
- The car lacks power or runs poorly
Hva feilen kan påvirke2
- Engine output is limited
- Engine speed is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.