Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-0642
    VOLVO

    ECM-0642 - Power supply 1. Signal too low

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007Kun motor: D4204T
    • Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Kun motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007Kun motor: D4204T
    • Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007Kun motor: D4204T
    • Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6

    Hva betyr feilkoden?

    The supply voltage to all emission-related sensors is too low, and the engine control module sets the code. The cause may be poor connections, or a supply wire shorted to earth. The sensors may then give incorrect signals, which can show up as starting problems or poor driving.

    Mulige årsaker

    • Contact resistance or oxidation in the connections
    • Supply wire short-circuited to earth

    Hva du kan gjøre

    1. 1Check the connectors to the engine control module for contact resistance and oxidation
    2. 2Inspect the wiring from the engine control module to the sensors for chafing, since a chafed wire can short to earth
    3. 3With the ignition off, use a multimeter to check that the supply wire has no contact with earth (the body)
    4. 4If the fault remains after these checks, have a workshop read the sensors and control module with diagnostic equipment and remedy what is found

    Symptomer du kan merke3

    • The engine starts unreliably or not at all
    • The car runs poorly and lacks power
    • Yellow warning symbol with text message in the display

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.