VOLVO
ECM-0692 - Engine cooling fan. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007Kun motor: D4204T
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Kun motor: D4204T
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Kun motor: D4204T
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
The ECM monitors the cooling fan's operation. If the PWM signal to the fan is too high, the code is set. The cause may be a signal wire shorted to voltage, or a damaged fan. The engine may then overheat, or the fan may run continuously.
Mulige årsaker
- The signal wire is shorted to voltage
- Damaged cooling fan
Hva du kan gjøre
- 1With the ignition off, check that the fan blades are not blocked, since this can set the code
- 2Inspect the signal wire to the fan for chafing and for short circuits to voltage
- 3Use a multimeter to check that the signal wire has no contact with supply voltage
- 4If the fault remains, a workshop should decide whether the fan needs replacing
Symptomer du kan merke2
- The engine runs hot or overheats
- The fan keeps running
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.