VOLVO
ECM-1202 - Fuel injection system driver. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007Kun motor: D4204T
- Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo C70 (2006–2013)2008Kun motor: D4204T
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Kun motor: D4204T
- Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Kun motor: D4204T
- Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
Hva betyr feilkoden?
The injection time for the injector valve on cylinder 2 has been wrong. The engine control module monitors the injector output stages, and when the time does not match the code is set. The last digit of the code gives the cylinder, here cylinder 2.
Mulige årsaker
- Contact resistance, oxidation or poor contact in the connections
- Open circuit in the signal cable (+)
- Open circuit in the signal cable (-)
- Damaged injector
Hva du kan gjøre
- 1Clear the code, road test and see whether it returns
- 2Check the connector on the cylinder 2 injector for play, contact resistance and oxidation
- 3Use a multimeter to check that the two wires to the injector are not broken and have no short to ground or supply voltage
- 4If the fault returns and nothing is found, have a workshop replace the cylinder 2 injector if needed
Symptomer du kan merke2
- The engine lacks power and runs poorly
- A message and a warning symbol appear in the display
Hva feilen kan påvirke2
- Engine speed is limited
- The car can be driven in limp-home mode
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.