VOLVO
ECM-130F - Cylinder to Crankshaft Reference Synchronization
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2008–2009Kun motor: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3, B4204S4
- Volvo S40 (2004–2013)2008–2009Kun motor: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4
- Volvo V50 (2004–2013)2008–2009Kun motor: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4
Hva betyr feilkoden?
The ECM watches both the camshaft sensor and the flywheel sensor, and needs their signals to know which cylinder is in the right position. The fault is set when the synchronization signal is missing. It can only be detected when the module is able to check the sensors and the conditions for the check are met.
Mulige årsaker
- Damaged camshaft sensor
- Damaged flywheel sensor
Hva du kan gjøre
- 1Read the fault code, clear it and test drive to see whether it returns
- 2Check that the camshaft sensor and flywheel sensor connectors are free from contact resistance and oxidation
- 3Check that the sensors are firmly fitted and that their wiring has no chafing or pinch damage
- 4If you have a diagnostic tool: check in live data that both the camshaft sensor and the flywheel sensor give a signal when the engine runs
- 5If the connectors and wiring are fine: have a workshop check the sensors with diagnostic equipment
Symptomer du kan merke1
- Engine warning lamp comes on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.