VOLVO
ECM-1330 - Air mass. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The ECM watches the temperature sensor signal inside the MAF sensor. The fault is set when that signal is faulty. The cause can be connections, wiring or the sensor inside the MAF sensor.
Mulige årsaker
- Contact resistance, oxidation or open circuit in the connections
- Signal wire shorted to voltage
- Damaged intake air temperature sensor inside the MAF sensor
- Signal wire shorted to ground
Hva du kan gjøre
- 1Read the fault code, clear it and test drive to see whether it returns
- 2Check the MAF sensor connections for contact resistance, play and oxidation
- 3Check the wiring to the MAF sensor for breaks, chafing and shorts to voltage or ground
- 4With a multimeter, check that the signal wire is not shorted to voltage or ground
- 5If you have a diagnostic tool: read air mass in live data and check that it rises as engine speed rises
- 6If the connections and wiring are fine: have a workshop check the MAF sensor
Symptomer du kan merke3
- Engine warning lamp comes on
- A text message appears in the display
- Reduced performance
Hva feilen kan påvirke2
- A calculated value is used instead of the sensor reading
- Engine torque may be limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.