VOLVO
ECM-1340 - Air mass. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) monitors the supply voltage to the MAF sensor and sets the fault when it is incorrect. The cause can be a weak battery, a fault in the charging system or a short in the wiring. The fault can be set by either a too high or a too low signal.
Mulige årsaker
- Fault in the charging system
- Damaged MAF sensor
- Contact resistance in the connections
- Wire shorted to ground
Hva du kan gjøre
- 1Read the fault code, clear it and test drive to see whether it returns
- 2Check the battery condition and that the charging system works, since an incorrect supply voltage can cause the fault
- 3Check the MAF sensor connections for contact resistance, play and oxidation
- 4With a multimeter, check that the wire to the MAF sensor is not shorted to ground
- 5If you have a diagnostic tool: read air mass in live data with the engine running and check that it rises when the accelerator pedal is pressed
- 6If the battery and connectors are fine: have a workshop check the supply to the MAF sensor
Symptomer du kan merke1
- A text message appears in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.