Hva betyr feilkode ECM-1409?

Diagnose og feilkodedefinisjon for ECM-1409 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C70 (2006–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-1409 - EGR control. Faulty signal

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (10)

Hva betyr feilkoden?

The engine control module (ECM) monitors the function of the EGR valve. The fault is set when the signal from the EGR valve position sensor (potentiometer) is faulty. It can be caused by poor contact, a break or a short in the wiring, or a damaged EGR valve.

Mulige årsaker

Play, contact resistance or oxidation in the connections to the EGR valve
Open circuit or short in the supply to the EGR valve position sensor
Open circuit or short in the signal wire
Open circuit or short in the ground wire
Damaged EGR valve

Hva du kan gjøre

1Read the fault code, clear it and test drive to see whether it returns
2Check the EGR valve connectors for play, contact resistance and oxidation
3Check that the EGR valve is not stuck by dirt and soot; this alone can set the fault
4Check the wiring to the EGR valve for breaks, chafing and shorts to ground or voltage
5If you have a diagnostic tool: read the EGR valve position in live data with the engine running and check that it changes when the valve is activated
6If the wiring is fine: have a workshop check the EGR valve

Symptomer du kan merke1

The check engine lamp lights or behaves abnormally

Hva feilen kan påvirke1

Engine power is limited

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.