Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-1552
    VOLVO

    ECM-1552 - Fuel injection system driver. Faulty signal

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007Kun motor: D4204T
    • Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Kun motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007Kun motor: D4204T
    • Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007Kun motor: D4204T
    • Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6

    Hva betyr feilkoden?

    The engine control module (ECM) watches the output stages for the fuel injectors and reacts when the amount of fuel injected is too large. The last digit of the fault code shows that cylinder 2 is concerned.

    Mulige årsaker

    • Contact resistance or oxidation in the connections to the cylinder 2 injector
    • Open circuit in the signal wire (+) to cylinder 2
    • Open circuit in the signal wire (-) to cylinder 2
    • Damaged cylinder 2 injector

    Hva du kan gjøre

    1. 1Switch off the ignition and check the connector to the cylinder 2 injector for play, contact resistance and oxidation
    2. 2Check that the wires to the cylinder 2 injector are not pinched, chafed or broken, and use a multimeter to confirm they are intact
    3. 3If you have a diagnostic tool: activate the cylinder 2 injector and see whether it responds
    4. 4Clear the code and test drive. If it returns although the wiring is intact, have a workshop replace the cylinder 2 injector

    Symptomer du kan merke3

    • Check engine light comes on or behaves abnormally
    • The engine lacks power
    • Warning symbol and a text message in the display

    Hva feilen kan påvirke2

    • Engine speed is limited
    • The car goes into limp home mode

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.