Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-1553
    VOLVO

    ECM-1553 - Fuel injection system driver. Faulty signal

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007Kun motor: D4204T
    • Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Kun motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007Kun motor: D4204T
    • Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007Kun motor: D4204T
    • Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6

    Hva betyr feilkoden?

    The engine control module (ECM) monitors the integrated output stages for the fuel injectors and how much fuel each one injects. The last digit of the code shows that the fault concerns cylinder 3.

    Mulige årsaker

    • Contact resistance, oxidation or poor contact in the connections to the cylinder 3 injector
    • Open circuit in the signal wire (+) to cylinder 3
    • Open circuit in the signal wire (-) to cylinder 3
    • Damaged cylinder 3 injector

    Hva du kan gjøre

    1. 1Switch off the ignition and check the connector to the cylinder 3 injector. Look for play, contact resistance and oxidation
    2. 2Look for pinched or chafed wires to the cylinder 3 injector, and use a multimeter to check that the wires have no open circuit
    3. 3If you have a diagnostic tool: activate the cylinder 3 injector and check that it responds
    4. 4If the code comes back after clearing and test driving, although the wiring is intact, have a workshop replace the injector

    Symptomer du kan merke3

    • Check engine light comes on or behaves abnormally
    • The engine lacks power
    • Warning symbol and a text message in the display

    Hva feilen kan påvirke2

    • Engine speed is limited
    • The car goes into limp home mode

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.