VOLVO
ECM-1610 - Immobilizer. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS40 (1996–2004), V40 (1996–2004)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module (ECM) gets no communication from the immobilizer control module, or the immobilizer does not allow the engine to start. The fault code is also stored in the immobilizer control module. It can also be set when keys are being programmed, even with no fault present.
Mulige årsaker
- Contact resistance in the connectors
- Open circuit in the signal wire
- Communication wire short-circuited to ground or voltage
- Fault in the immobilizer system
Hva du kan gjøre
- 1If keys were recently programmed or replaced, the code may have been set with no real fault. Try starting with another of the car's keys
- 2Switch off the ignition and check the connectors between the engine control module and the immobilizer control module for contact resistance and oxidation
- 3With a multimeter, check that the communication wire between the modules is not broken and is not short-circuited to ground or voltage
- 4If the fault remains, have a workshop read the fault codes in the immobilizer control module, since the code is stored there
Symptomer du kan merke1
- The engine does not start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.