Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-1650
    VOLVO

    ECM-1650 - Power Steering Pressure Switch Out Of Self Test Range

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (9)
    • Volvo C30 (2007–2013)2008–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo C30 (2007–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3, B4204S4
    • Volvo S40 (2004–2013)2008–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo S40 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4
    • Volvo V50 (2004–2013)2008–2009Kun motor: B4184S11, B4184S8, B4204S3
    • Volvo V50 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4

    Hva betyr feilkoden?

    The ECM checks the signal from the servo pressure switch, which senses pressure in the power steering system, against its normal range. If the signal is outside that range while the engine runs, fault code ECM-1650 is set. The control module uses the signal to compensate for the torque the power steering takes.

    Mulige årsaker

    • Contact resistance, oxidation or poor contact in the connections
    • Open circuit or short to ground in the signal wire
    • Signal wire short-circuited to voltage

    Hva du kan gjøre

    1. 1On cars with hydraulic power steering: switch off the ignition and check the servo pressure switch connector for play, contact resistance and oxidation
    2. 2With a multimeter, check that the signal wire from the servo pressure switch is not broken or shorted to ground or voltage
    3. 3If you have a diagnostic tool: check in live data that the servo pressure switch changes state when the steering wheel is turned to full lock
    4. 4Check that the relevant fuses are intact, for example in the fuse box
    5. 5If the fault remains, have a workshop check the servo pressure switch and the hydraulic pressure system

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.