VOLVO
ECM-1828 - Brake pedal switch. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS40 (1996–2004), V40 (1996–2004)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The ECM compares the brake light switch with the brake pedal switch. If the two show different states for a set period, fault code ECM-1828 is set. Cars without cruise control have only the brake light switch, which is operated by the brake pedal.
Mulige årsaker
- Signal wire to the brake pedal switch shorted to voltage
- Open circuit in the signal wire to the brake pedal switch
- Signal wire to the brake light switch shorted to voltage
- Switch at the brake pedal incorrectly fitted or adjusted
- Defective brake pedal switch or brake light switch
Hva du kan gjøre
- 1Switch off the ignition and check that the brake light switch and the brake pedal switch are correctly fitted and free of play and oxidation
- 2With a multimeter, check that the signal wires from the switches are not shorted to voltage and are not broken
- 3If you have a diagnostic tool: check in live data that the brake light switch and the brake pedal switch change together as the pedal is pressed and released
- 4Braking is safety-critical. If the pedal feels different or the brake lights stay on, do not drive the car until a workshop has checked the braking system
- 5If the fault remains, have a workshop adjust or replace the switches at the brake pedal
Symptomer du kan merke2
- Cruise control does not work at all
- The brake lights stay on all the time
Hva feilen kan påvirke1
- Cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.