VOLVO
ECM-1831 - Injector 2. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS40 (1996–2004), V40 (1996–2004)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The ECM drives the injector for cylinder 2 over a control signal wire. If the signal is faulty, or the control module has an internal fault, fault code ECM-1831 is set.
Mulige årsaker
- Control signal wire shorted to voltage
- Control signal wire shorted to ground
- Open circuit in the control signal wire
- Defective cylinder 2 injector
- Defective engine control module
Hva du kan gjøre
- 1Switch off the ignition and check the connector to the cylinder 2 injector for play, contact resistance and oxidation
- 2With a multimeter, check that the control wire to cylinder 2 is not broken and not shorted to ground or voltage
- 3If the valve and wire are fine, the control module may be at fault. Clear the code and see whether it comes back
- 4If the fault remains, have a workshop replace the cylinder 2 injector or check the control module
Symptomer du kan merke2
- The engine does not start
- The engine does not run on all cylinders
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.